Supero 2122TG-HIBQRF User Manual page 96

A+ SERVER 2122TG-HIBQRF/HTRF USER'S MANUAL
Figure 6-18. Removing a Dummy Drive from Carrier
Drive Carrier
Installing a Drive into the Carrier
1. Install a new drive into the carrier with the printed circuit board side facing
down so that the mounting holes in the drive align with those in the carrier.
2. Secure the hard drive into the carrier with the screws.
Figure 6-19. Installing a Drive into the Carrier
3. Use the open handle to replace the drive carrier into the chassis.
4. Gently close the drive carrier handle to secure the drive and carrier into the
chassis drive bay.
6-18
Dummy Drive