Specifications - Roland CAMM-1 CM-24 User Manual

9 Specifications

Mechanism
Driving method
Maximum cutting area
Acceptable media widths
Acceptable paper widths
Acceptable paper types
Tools
Max. cutting speed
Blade force
Mechanical resolution
Software resolution
Distance accuracy
Repetition accuracy
Interface
Buffer size
Instruction system
Switches
Control switches
LED
Power consumption
Acoustic noise level
Dimensions
Weight
Operating temperature
Operating humidity
Accessories
All manuals and user guides at all-guides.com
CM-24
Width: 584 mm (23")
Length: 24,998 mm (984-1/8")
50 mm—711 mm (1-15/16"—28")
50 mm—711 mm (1-15/16"—28")
Cutters: Special cutter for CAMM-1 series
Pens: Water-based fiber-tipped pens, and Thick water-based fiber-tipped pens (options)
During cutting: 400 mm/sec. (15-11/16"/sec.) (When DIP switch SW-8 is at ON: 100 mm/sec. (3-7/8"/sec.))
Error of less than +/- 0.2% of distance traveled, or 0.1 mm (0.00394"), whichever is grater
0.1 mm (0.00394") or less (Excluding stretching/contraction of the material,
and provided that material length is under 1600 mm (63"))
Parallel (Centronics compatible), Serial (RS-232C)
CAMM-GLIII (mode1 and mode2)
Power switch, Pen force slider, DIP switches
SETUP, PAUSE, PEN MODE, REPLOT, TEST , ORIGIN SET,
POWER/ERROR LED, SETUP LED, PAUSE LED, PEN MODE LED, REPLOT LED, and TEST LED
0.8 A /117 V, 0.4 A / 220-230 V, 0.4 A / 230 -240 V
[Cutting mode] : less than 70 dB (A)
840 mm (W) x 278 mm (D) x 221 mm (H)
(33-1/8" (W) x 11" (D) x 8-3/4" (H))
14 kg (30.9 lb.)
Power Cord x 1, Blade (ZEC-1005) x 1, Blade Holder (XD-CH3) x 1, Material for Test Cuts x 1,
Test-use Application Tape x 1, User's Manual x 1, CAMM-1 DRIVER for windows 95 x 1,
Roller base x 1*, Cutter Tool (for trimming material) x 1*, Tweezers x 1*
Media-movement method
Stepping motor (Micro-step)
Width: 280 mm (11")
Length: 24,998 mm (984-1/8")
50 mm—406 mm (1-15/16"—16")
50 mm—406 mm (1-15/16"—16")
High-quality paper
30 gf—200 gf
0.05 mm/step (0.00197"/step)
0.025 mm/step (0.000984"/step)
1 MB (800 KB for replot buffer)
[Standby mode] : less than 40 dB (A)
(According to ISO 7779)
535 mm (W) x 278 mm (D) x 221 mm (H)
(21-1/8" (W) x 11" (D) x 8-3/4" (H))
5—40°C (41—104°F)
35%—80% (non-condensing)
CM-12
, , ,
9.5 kg (20.9 lb.)
*..... CM-24 only
29