Roland UM-4 Owner's Manual page 32

Installing & Setup the Driver
5
In the dialog box that appears, select the MIDI equipment that is connected to each port of the
UM-4, and click [>>Add>>].
fig.UM4FME
Manufacturer:
Select the manufacturer of your MIDI equipment. If the appropriate manufacturer
does not appear in the list, select "Other."
Model:
Select the model of your MIDI equipment. If the appropriate model does not appear in
the list, select "Other."
Studio Location:
Select "UM-4," and for "Cable" that appears below it, select the port to which your
MIDI equipment is connected.
6
If two or more units of MIDI equipment are connect, repeat step 5.
32