Roland UM-4 Owner's Manual page 23

Installing the UM-4 Driver
When Using S-MPU64
The UM-4 Driver is compatible with the S-MPU64. However, you cannot use the
UM-4 Driver and the S-MPU64 Driver at the same time.
If you have already installed the S-MPU64 Driver in your computer, be sure to
follow the procedure written below to delete the S-MPU64 Driver and install the
UM-4 Driver.
Remove the files in the System folder written below and restart your Macintosh.
Then install the UM-4 Driver.
• the "USBSMPU64Driver" file in the "Extensions" folder
• the "SMPU64" file in the "OMS Folder" folder
1
In the "UM Driver E" -"UM-4" folder of the CD-ROM, double-click the "UM4 OMS Driver-E
Installer" icon.
fig.03-scdrv1.e.eps_50
2
Make sure that OMS is already installed in the location where the driver will be installed, and
click [Install].
fig.03-scdrv2.e
Installing & Setup the Driver
23