Eq (Equalizer) - Roland Studio Canvas SD-80 Owner's Manual

Using the effects of the internal sound generator
Mod Rate (Modulation Rate)
Specifies the speed (frequency) at which the chorus sound will be modulated. Higher settings produce
faster modulation.
Mod Depth (Modulation Depth)
Specifies the depth of modulation for the chorus sound. Higher settings will produce deeper modulation.
Feedback
Specifies the level of the chorus sound that will be re-input to the chorus (i.e., the amount of feedback).
Feedback lets you produce a denser chorus sound. Increasing this value will raise the feedback level.
Send to Reverb
Specifies the amount of chorus sound that will be sent to reverb. Higher settings will increase the amount
that is sent to reverb.

■ EQ (Equalizer)

You can make equalizer settings for the output of the sound generator section.
EQ1L:
EQ1R:
EQ2L:
EQ2R:
EQ Switch
Switches the equalizer on/off.
EQ1 Low Frequency
EQ2 Low Frequency
Specify the frequency at which the low range will be adjusted.
EQ1 Low Gain
EQ2 Low Gain
Specify the gain (amount of boost or cut) of the low range. Increasing this setting in the positive direction
will emphasize the low range.
EQ1 High Frequency
EQ2 High Frequency
Specify the frequency at which the high range will be adjusted.
EQ1 High Gain
EQ2 High Gain
Specify the gain (amount of boost or cut) of the high range. Increasing this setting in the positive direction
will emphasize the high range.
42
0–127
0–127
0–127
0–127
EQ for the left channel (Lch) of the OUTPUT 1 stereo output
EQ for the right channel (Rch) of the OUTPUT 1 stereo output
EQ for the left channel (Lch) of the OUTPUT 2 stereo output
EQ for the right channel (Rch) of the OUTPUT 2 stereo output
Off, On
200/400 Hz
200/400 Hz
-15–+15
-15–+15
2000/4000/8000 Hz
2000/4000/8000 Hz
-15–+15 dB
-15–+15 dB