Selecting A Drum Set - Roland Studio Canvas SD-80 Owner's Manual

Selecting a drum set

If the part type is Drum Set, use the following procedure to select a drum set. First make sure that the part
type is Drum. For details on how to set the part type to Drum, refer to "Selecting the type of part (INST/
DRUM)" (p. 24).
For details on the drum sets that are available, refer to "Instrument list (GM2 / Native mode)" (p. 95).
* Drum sets do not have variation sounds.
fig.5-07
1.
Press [INST].
The button will light.
fig.5-07a_67.2
2.
Turn the [VALUE] dial to select a drum set. The drum
set name shown in the display will change.
1
2
Using the internal sound generator
27