Table of Contents
Advertisement
Switching sounds in GM2 mode
Transmit bank select LSB (CC#32) and program change (PC#).
* Bank select MSB (CC#00) is used to switch the part mode. Inst part and Drum part correspond to the following
numbers.
Inst part
Drum part
121(79H)
120 (78H)
<Example> Specifying part 11 as a GM2 Inst part (009: Celesta)
MIDI CH=
CC#00
CC#32
PC#
Switching sounds in Native mode
Transmit bank select LSB (CC#32) and program change (PC#).
* Bank select MSB (CC#0) is used to switch the Part Mode. The number corresponds to Inst part or Drum part as
follows:
Inst part
80 (50H)
Special 1 set
81 (51H)
Special 2 set
87 (57H)
User set
96 (60H)
Classical set
97 (61H)
Contemporary set
98 (62H)
Solo set
99 (63H)
Enhanced set
<Example> Specifying part 11 as an Inst part (009: Celesta) of the Classical set
MIDI CH=
CC#00
CC#32
PC#
Switching sounds in GS mode
Transmit bank select MSB and program change.
* Leave the bank select LSB set at 0.
Actual transmission of MIDI messages
When you input MIDI messages into sequencer software on your computer for transmission to the SD-80,
send the messages in the following order.
1.
Value of control change 0:
2.
Value of control change 32:
3.
Value of program change:
(*1)Refer to the explanation of the bank select lower byte (LSB) (see the following section).
The bank select message consists of steps 1 and 2. Bank Select messages are one form of control
change message. Processing of the bank select is suspended until the program change is received.
11
... specify MIDI channel 11
121
... set as a GM2 Inst part
0
... specify variation number 000
9
... specify program change number 009
Drum part
—
—
—
—
86 (56H)
User set
104 (68H)
Classical set
105 (69H)
Contemporary set
106 (6AH)
Solo set
107 (6BH)
Enhanced set
11
... specify MIDI channel 11
96
... set as an Inst part of the Classical set
0
... specify variation number 000
009
... specify program change number 009
MIDI bank number MSB (variation number)
MIDI bank number LSB (*1)
MIDI program number (instrument number)
Controlling the SD-80 via MIDI
59
Advertisement
Table of Contents
