Volvo V90 CROSS COUNTRY 2021 Owner's Manual page 658

MAINTENANCE AND SERVICE
Replacing the dipped beam bulb
The dipped beam bulb in the halogen head-
lamp can be replaced without assistance
from a workshop.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed.
IMPORTANT
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
Left-hand headlamp.
1. Detach the headlamp's rubber cover for
the dipped beam bulb.
2. Unplug the connector from the bulb.
656
3. Detach the bulb by pushing it gently
upwards and pulling it straight out.
4. Fit a new bulb in the socket. The bulb's
guide pin must be aimed straight
upwards.
5. Press in the connector.
6. Refit the headlamp's rubber cover.
Related information
Exterior lamp positions (p. 655)
•
Removing the plastic cover for bulb
•
replacement (p. 654)
Bulb specifications (p. 659)
•
Replacing the main beam lamp
The main beam bulb in the halogen headlamp
can be replaced without assistance from a
workshop.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed.
IMPORTANT
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
Left-hand headlamp.
1. Detach the headlamp's rubber cover for
the main beam bulb.
2. Detach the bulb by turning the bulb holder
upward and then pulling straight out.