Table of Contents
Advertisement
Through-load hatch in the rear seat
The hatch in the rear seat's backrest can be
opened to transport long narrow items, e.g.
skis.
The figure is schematic - parts may vary depending
on car model.
1.
In the cargo area, grip the hatch's handle
and fold down the hatch.
2. Fold forward the armrest in the rear seat.
If the private locking function is used then the
through-load hatch must be closed.
Related information
Recommendations for loading (p. 604)
•
Private locking (p. 288)
•
Load retaining eyelets (p. 606)
•
Fitting and removing cargo cover*
In the extended position, the cargo cover pre-
vents visual access to the cargo area.
Fitting cargo cover
Insert one of the cargo cover's end pieces
in the recess in the side panel in the cargo
area.
Then insert the other end piece in the
recess in the side panel on the opposite
side.
Press down the end pieces on both sides -
one by one.
> When a "click" is heard and the red
marking on each end piece has disap-
peared, the cargo cover is attached -
check that it is affixed securely.
LOADING, STORAGE AND PASSENGER COMPARTMENT
4.
Fold the cargo cover's front panel forward
to eliminate the space between the cargo
cover and the rear seat's backrests.
IMPORTANT
The cover plate has two plastic parts that
act as support to hold it in place.
The plastic parts must not be used to hang
bags on. They are not designed for this
purpose and may break.
If the safety net* shall be used at the same
time as the cargo cover then the safety net
must be fitted first.
}}
607
* Option/accessory.
Advertisement
Table of Contents
