Table of Contents
Advertisement
Manual position – M
Overview of the shift pattern in the driver display for
large gear lever.
In M position, it is possible to change gear
manually. The car engine-brakes when the
accelerator pedal is released.
Position M is selected by moving the gear
selector sideways from position D to the end
position at "±".
Press the gear selector forwards to "+"
•
(plus) to change up one step and release
it.
Press the gear selector backwards to "–"
•
(minus) to change down one step and
release it.
Press the gear selector to the side to its
•
end position at D to return to the D posi-
tion.
Overview of the shift pattern in the driver display for
small gear lever.
In M position, it is possible to change gear
manually. The car engine-brakes when the
accelerator pedal is released.
Position M is selected by moving the gear
selector backwards from the D position.
Press the gear selector to the right to "+"
•
(plus) to change up one step and release
it.
Press the gear selector to the left to "–"
•
(minus) to change down one step and
release it.
Press the gear selector backwards to
•
return to the D position.
The gearbox automatically shifts down if the
speed decreases to a level lower than appro-
priate for the selected gear, in order to avoid
jerking and stalling.
STARTING AND DRIVING
Related information
Automatic gearbox (p. 446)
•
Gear selector inhibitor (p. 451)
•
Changing gear with steering wheel pad-
•
dles* (p. 450)
Kick-down function (p. 453)
•
* Option/accessory.
449
Advertisement
Table of Contents
