Table of Contents
Advertisement
LOADING, STORAGE AND PASSENGER COMPARTMENT
||
Removing cargo cover
In retracted position:
1.
Depress the button on one of the retracted
cargo cover's end pieces and lift out that
end.
2. Angle the cover up/out carefully.
> The other end piece loosens automati-
cally and the cover can be lifted out of
the cargo area.
Related information
Operating cargo cover* (p. 608)
•
Recommendations for loading (p. 604)
•
608
Operating cargo cover*
There are two extended positions for the
cargo cover - a full-cover position and a load-
ing position, where it is partially extended to
make it easier to reach further into the cargo
area.
Full-cover position
1.
Grip the handle and pull out the cargo
cover so that it slides over the side panels
in the cargo area. Pull to the end position.
2. Guide the cover's attachment pins into the
grooves in the side panels. Release, while
at the same time angling the handle
slightly upwards so that the attachment
pins hook in.
> The cargo cover is locked in the full-
cover position.
IMPORTANT
Do not load objects on top of the cargo
cover.
Loading mode
From the full-cover position:
Grasp the handle and pull it back until it
stops.
Angle the cover down.
Move the cover and its attachment pins
carefully forward and up over the hooks.
> The cover retracts until it stops in the
loading position.
Returning to full-cover position from loading
position:
1.
Grip the handle and pull the cargo cover
out to the end position.
2. Release the handle so that the attachment
pins hook into the hooks.
> The cover is locked in the full-cover
position.
* Option/accessory.
Advertisement
Table of Contents
