Operations - Bissell LITTLE GREEN PRO 2505 User Manual

Table of Contents

Advertisement

Available languages

Available languages

Operations

Cleaning with your deep cleaner
Plug unit in and turn ON by pressing the
1.
Power Button.
Hold cleaning tool approximately 1 inch
2.
above soiled surface. Press Spray Trigger to
apply cleaning solution to soiled area.
3.
Using the brush on the cleaning tool, gently
scrub area to be cleaned.
For thorough cleaning, spray additional
4.
solution while brush and suction are in
contact with surface.
Apply downward pressure on cleaning
5.
tool and pull it toward you. The suction
will remove the dirt and cleaning solution.
Continue until no more dirt can be removed.
6.
As a final step, use "drying strokes" (by not
pressing the Spray Trigger) to remove as
much liquid/moisture as possible. Repeat this
step as often as necessary.
Cleaning with 3"/4"/6" Tool
1.
Attach the 3"/4"/6" Tough Stain Tool to the
Flex Hose.
2.
Press the Spray Trigger to mist solution over
and onto the soiled area.
3.
Release Spray Trigger and gently scrub the
stain.
To lift the stain away, apply downward
4.
pressure on the tool and slowly pull it toward
you. Then use "drying strokes" (by not
pressing down trigger) to remove remaining
moisture. Repeat as needed.
Cleaning with Stain Trapper Tool*
*select models only
Attach the Stain Trapper Tool to the end of
1.
the hose.
2.
Slowly move the tool back and forth over the
stain. Be careful not to move the tool back
and forth too quickly or soiled water will flow
back into the hose.
To empty the tool, rotate the small tank on
3.
the bottom of the tool to unlock it.
Dump dirty water into a sink or toilet and
4.
rinse the tank out with clean water.
Replace the tank by lining up the locking
5.
teeth with their mating slots (make sure
the two teeth that are closest together are
pointed toward the brush). Turn the tank to
lock it into place.
WARNING
Keep spray away from face. Failure to do so may
result in personal injury.
IMPORTANT
Check the manufacturer's tag before
cleaning upholstery. Test a small, hidden
area for colorfastness. If color is affected,
do not use. If manufacturer's tag is
missing or not coded, check with your
furniture dealer.
www.BISSELL.com
7

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents