Table of Contents
Advertisement
en-us Transportation, storage and disposal
16.1 Clean drain pump
Large food remnants or foreign objects can block the drain
pump. As soon as the dishwashing water no longer drains
properly, the drain pump must be cleaned.
CAUTION
There may be some sharp debris, such as glass
fragments, blocking the drain pump.
Use caution when removing parts for cleaning.
▶
Disconnect the appliance from the power supply.
1.
Remove the upper and lower rack.
2.
Remove the filter system.
3.
Scoop out any water.
4.
Use a sponge if necessary.
Pry the pump cover off using a spoon and grip it by the
5.
crosspiece.
Lift the pump cover diagonally inward and take it out.
6.
a Now you can reach the impeller with your hand.
Remove any food remnants or foreign objects in the
7.
area of the impeller.
Insert the pump cover
8.
1
a The pump cover clicks into position.
Install the filter system.
9.
Insert the upper and lower rack.
10.
34
and press down
.
2
17 Transportation, storage and
Transportation, storage and disposal
disposal
Transportation, storage and disposal
17.1 Removing the appliance
Disconnect the appliance from the power supply.
1.
Turn off the water faucet.
2.
Detach the drain connection.
3.
Detach the water connection.
4.
Loosen any screws fastening the appliance to cabinet
5.
parts.
Remove the base panel if fitted.
6.
Pull the appliance out carefully, along with the hose
7.
behind it.
17.2 Vacation and Storage
NOTICE:
Preparing your unit for vacation
Before leaving for vacation during warmer weather,
▶
besides turning off the main valve, also turn off water
supply at the nearest point to the dishwasher. During
colder weather, please follow the instructions for
winterizing your unit below.
Winterizing your unit
If your dishwasher will be unused for an extended
▶
period of time in a location that experiences freezing
temperatures (vacation home or through a vacation
period), have your dishwasher winterized by an
authorized service provider.
17.3 Transporting the appliance
To avoid damage to the appliance, empty it before
transporting.
Note: Always transport the dishwasher upright to prevent
residual water getting into the machine's controls and
damaging the appliance.
Remove dishware from the appliance.
1.
Secure loose parts.
2.
Turn the water faucet on.
3.
Switch on the appliance.
4.
Select the cycle with the highest temperature.
5.
Start the cycle. → Page 20
6.
To drain the appliance, terminate the cycle after approx.
7.
4 minutes.
→ "Terminating the wash cycle", Page 20
Switch off the appliance.
8.
Turn off the water faucet.
9.
To empty the residual water out of the appliance,
10.
detach the supply hose and let the water drain out.
Advertisement
Table of Contents
