Program Change - Roland GR-20 Owner's Manual

❍General Purpose #3
STATUS SECOND
BnH 12H
n=MIDI Channel Number:
vv=Control Value:
* Transmitted the envelope data of the strings when "E FLW" is on.
* Data is sent only in Mono mode. Transmission doesn't take place in Poly mode.
❍Hold1
STATUS SECOND
BnH 40H
n=MIDI Channel Number:
vv=Control value:
01H-3FH=OFF, 40H-7FH=ON
* Transmitted the operation of HOLD TYPE = "H4".
❍RPN MSB/LSB
STATUS SECOND
BnH 65H
BnH 64H
n=MIDI Channel Number:
mm=Upper byte of the parameter data designated by RPN
ll=Lower byte of the parameter data designated by RPN
<<< RPN >>>
Control change includes RPN(registered parameter number), function which are defined by
the MIDI standard.
The GR-20 can transmit only one RPN: pitch bend sensitibity(RPN#0).
RPN Data entry
MSB LSB MSB LSB
00H 00H 18H 00H
●Program change
STATUS SECOND
CnH ppH
n=MIDI Channel Number:
pp=Program Number:
* The recognized Program Change Number corresponds to each patch as follows.
BANK MSB PROGRAM NUMBER
0 0
0 1
0 2
0 3
0 :
0 97
0 98
1 0
1 1
1 2
:
2 0
2 1
2 2
:
3 0
3 1
3 2
:
4 0
4 1
4 2
:
5 0
5 1
5 2
THIRD
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
THIRD
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
THIRD
mmH
llH
0H - FH (ch.1 - ch.16)
Function
pitch bend sensitivity
0H - FH (ch.1 - ch.16)
00H - 7FH (prg.1 - prg.128)
PATCH
USER 1
USER 2
USER 3
USER 4
:
USER 98
USER 99
PIANO 1
PIANO 2
PIANO 3
:
ORGAN/KB 1
ORGAN/KB 2
ORGAN/KB 3
:
BASS/GTR 1
BASS/GTR 2
BASS/GTR 3
:
BRASS 1
BRASS 2
BRASS 3
:
WIND 1
WIND 2
WIND 3
Chapter 6 Appendices
:
6 0
6 1
6 2
:
7 0
7 1
7 2
:
8 0
8 1
8 2
:
9 0
9 1
9 2
:
10 0
10 1
10 2
:
●Pitch Bend Change
STATUS SECOND
EnH llH
n=MIDI Channel Number:
mm,ll=Value:
■System Realtime Message
❍Active Sensing
STATUS
FEH
* This message is always transmitted at about 270msec' interval.
❍System Exclusive message
STATUS SECOND
F0H iiH,ddH,.....,eeH
F0H:
ii=ID Number:
dd,...,ee=Data:
F7H:
* For more details, refer to the page "Roland exclusive message" and Section3 or after.
3. Exclusive Communications
The GR-20 can transmit or receive system and patches parameters using system exclusive
messages. Model ID of exclusive message available on the GR-20 is 00H 72H.Device ID is
fixed at 10H.
When the GR-20 receives an Identify Request inquiry message, it will transmit an Identity
Reply.
:
STRING/ORCH 1
STRING/ORCH 2
STRING/ORCH 3
:
SYNTH/LEAD 1
SYNTH/LEAD 2
SYNTH/LEAD 3
:
VOICE/PAD 1
VOICE/PAD 2
VOICE/PAD 3
:
ETHNIC 1
ETHNIC 2
ETHNIC 3
:
RHYTHM/PERC 1
RHYTHM/PERC 2
RHYTHM/PERC 3
:
THIRD
mmH
0H - FH (ch.1 - ch.16)
00H, 00H - 7FH, 7FH (-8192 - +8191)
THIRD
F7H
System Exclusive
41H (65)
00H-7FH (0-127)
EOX (End of Exclusive/System Common
Message)
43