[Others] Menu - Panasonic AG-CX6 Operating Instructions Manual

CX10
[AUDIO SAMPLE RES.]
Sets the number of bits recorded for audio when the recording format is AVC-I100/AVC-I50. For any other recording formats, the recording is made with
a fixed number of bits for audio of either 16 bits or 24 bits.
The items that can be set are as follows.
≥ [16BIT], [24BIT]
(Factory setting: [16BIT])
[SUPER SLOW]
Sets the super slow recording. Enable this setting to shoot slow motion video.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
@ NOTE
0 In the following cases, it is fixed to [OFF].
j When the setting is other than [SYSTEM] menu → [FILE FORMAT] → [MOV]
j When [SYSTEM] menu → [REC FORMAT] is set to other than [1080-59.94p/422LongGOP 100M], [1080-29.97p/422LongGOP 50M], [1080-23.98p/
422LongGOP 50M], [1080-50.00p/422LongGOP 100M], and [1080-25.00p/422LongGOP 50M]
j When using the face detection/tracking AE&AF function

[OTHERS] menu

Configures the settings for writing/loading/initializing user files to the internal memory and other settings of the unit.
[FILE]
Saves and loads the setting data.
For the saving and loading target, refer to "Target items for scene file/setup file/initialization". (l 93)
For details about saving and loading, refer to "Handling setting data". (l 99)
[SCENE FILE(SD CARD)]
Loads or saves scene files on a memory card.
[LOAD]
[SAVE]
[SAVE AS]
[SETUP FILE(SD CARD)]
Loads or saves setup files on a memory card.
[LOAD]
[SAVE]
[SAVE AS]
[SETUP FILE(MEMORY)]
Loads/saves/initializes setup files in the internal memory of the unit.
[LOAD]
[SAVE]
[INITIALIZE]
[SLOT FOR LOAD/SAVE]
Sets the card slot to load and save the scene file, setup file, and streaming setting file.
The items that can be set are as follows.
≥ [SLOT1], [SLOT2]
(Factory setting: [SLOT1])
[HANDLE TALLY LED]
Sets whether the tally lamp is to illuminate or not.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
Chapter 4 Operation — Menu settings
Selects and loads the scene file saved on the memory card into the unit.
Can select if all of the scene files ([F1:] to [F6:]) are loaded, or individually loaded.
The setting values of the current scene file ([F1:] to [F6:]) are overwritten to the file selected from the list of scene files saved
in the memory card.
The setting values of the current scene file ([F1:] to [F6:]) is saved to the memory card as a new scene file by entering the file
name.
Selects the setup file saved on the memory card to load on the unit.
The unit will automatically restart after loading.
Overwrites the file selected in the list of the setup files saved on the memory card with the current setting values of the unit.
Enter a file name to save the current setting values in the unit as a new setup file in the memory card.
Loads setup file saved on the memory.
The unit will automatically restart after loading.
Saves the setup file to the memory.
Restores the factory settings from the current settings for the menus in the setup file.
The unit will automatically restart after execution.
- 89 -