Adjusting The Audio Recording Level - Panasonic AG-CX6 Operating Instructions Manual

Adjusting the audio recording level

There are manual adjustment and automatic adjustment as the adjustment method of the audio recording level.
≥ Audio channel can be individually set.

<CH1> switch
A
<CH2> switch
B
<AUDIO LEVEL CH1> dial
C
<AUDIO LEVEL CH2> dial
D
Automatic adjustment of the recording level
∫ When the handle unit is attached to the unit
1
Switch the <CH1>/<CH2> switch to <AUTO>.
≥ The following settings are disabled when the <CH1>/<CH2> switch is switched to <AUTO>.
j Recording level adjustments with the <AUDIO LEVEL CH1>/<AUDIO LEVEL CH2> dial
∫ When the handle unit has not been attached to the unit
1
Select the [AUDIO] menu → [MIC SETTING] → [CH1 LEVEL]/[CH2 LEVEL] → [AUTO].
≥ Following settings are disabled when the [AUDIO] menu → [MIC SETTING] → [CH1 LEVEL]/[CH2 LEVEL] → [AUTO] is selected.
j [AUDIO] menu → [MIC SETTING] → [CH1 LEVEL CONTROL]/[CH2 LEVEL CONTROL] setting
Manual adjustment of the recording level
∫ When the handle unit is attached to this unit
1
Switch the <CH1>/<CH2> switch to <MANU>.
2
Adjust the recording level with <AUDIO LEVEL CH1>/<AUDIO LEVEL CH2> dial.
∫ When the handle unit has not been attached to this unit
1
Select the [AUDIO] menu → [MIC SETTING] → [CH1 LEVEL]/[CH2 LEVEL] → [MANUAL].
2
Adjust the recording level with [AUDIO] menu → [MIC SETTING] → [CH1 LEVEL CONTROL]/[CH2 LEVEL CONTROL].
≥ The level increases as the number increases.
≥ Audio is not recorded when set to [MUTE].
@
NOTE
0 When the input level of audio exceeds 0 dB, the level display exceeding 0 dB is displayed in red in the
camera image screen and the audio level meter in the AUDIO screen of the mode check. This is
indicating that the input volume is too high.
Adjust so that the maximum value of the audio level does not exceed 0 dB.
Audio level meter
A
0 To enable the settings in [AUDIO] menu → [INPUT SETTINGS] → [CH1 LIMITER]/[CH2 LIMITER], make
the following settings.
j (When the handle unit is attached to the unit)
Switch the <CH1>/<CH2> switch to <MANU>
j (When the handle unit has not been attached to the unit)
Select [AUDIO] menu → [MIC SETTING] → [CH1 LEVEL]/[CH2 LEVEL] → [MANUAL]
Confirming the audio input level
The input level of the audio can be confirmed in the camera image screen and the AUDIO screen of the mode check.
Chapter 5 Shooting — Audio input
 

- 127 -
