Table of Contents
Advertisement
CX10
[FILE SPLIT]
Selects the split method of the file in P2 format to be recorded.
The items that can be selected are as follows.
≥ [ONE FILE], [SPLIT]
(Factory setting: [SPLIT])
@
NOTE
0 When using a microP2 card with 32 GB or less, it is split every 4 GB regardless of selected item. During proxy recording, the proxy data is split the same way.
0 A clip of 4 GB or more recorded by selecting [ONE FILE] cannot be copied to a microP2 card with 32 GB or less.
0 When the recording format is AVC-I100/AVC-I50, this is fixed to [SPLIT].
[2 SLOTS FUNC.]
Sets the recording function that uses 2 memory cards.
[OFF]
[RELAY REC]
[SIMUL REC]
[BACKGR REC]
(Factory setting: [RELAY REC])
[PRE REC]
Sets whether to perform pre-recording. (l 129)
The items that can be selected are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
CX10
[PROXY REC]
Sets whether to perform proxy recording. (l 133)
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
[REC FUNCTION]
[REC MODE]
Selects the recording mode.
[NORMAL]
[INTERVAL]
(Factory setting: [NORMAL])
[INTERVAL TIME]
Sets the interval duration for interval recording.
The items that can be set are as follows.
≥ [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]
(Factory setting: [5min])
[TC/UB]
[TC PRESET]
Sets the default value of the time code to record.
Hour
Minute
Second
Frame
(Factory setting: [00]) (each item)
≥ "h" is an abbreviation for hour, "m" for minute, "s" for second and "f" for frame.
[UB PRESET]
Sets user bits.
Enabled only when [USER] is selected in [UB MODE] of [TC/UB].
Each digit can be set in following range.
≥ [00]...[FF]
(Factory setting: [00])
Chapter 4 Operation — Menu settings
Does not set.
Sets to the relay recording. (l 129)
Sets to the simultaneous recording. (l 130)
Sets to the background recording. (l 131)
Performs the standard recording.
Performs the interval recording. (l 132)
[00]...[23]
[00]...[59]
[00]...[59]
[00]...[23] (when [23.98p])
[00]...[24] (when [50.00i], [50.00p], or [25.00p] is set)
[00]...[29] (when [59.94i], [59.94p], or [29.97p] is set)
- 80 -
Advertisement
Table of Contents
