Checking Power Trim And Tilt System - Yamaha LF250 Owner's Manual

2
4
1
3
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
5. Push the cowling lock levers downward
to secure the top cowling.
1
1. Cowling lock lever
1
1. Cowling lock lever
6. Check the fitting of the top cowling by
pushing it with both hands. NOTICE: If
the top cowling is not installed cor-
2
4
1
3
ZMU08474
ZMU08475
1
ZMU08476
rectly, water can enter the top cowling
and damage the engine, or the top
cowling can blow off at high speeds.
[ECM02371]
EMU2915A

Checking power trim and tilt system

EWM01931
WARNING
 Never get under the lower unit while it is
tilted, even when the tilt support lever is
locked. Severe injury could occur if the
outboard motor accidentally falls.
 Body parts can be crushed between the
motor and the clamp bracket when the
motor is trimmed or tilted.
 Be sure no one is near the outboard mo-
tor before performing this check.
1. Check the power trim and tilt unit for any
sign of oil leaks.
2. Operate each of the power trim and tilt
switches on the remote control and en-
gine bottom cowling to check that all
switches work.
3. Tilt the outboard motor up and check
that the tilt rod and trim rods are extend-
ed completely.
Operation
ZMU08477
57