Table of Contents
Advertisement
Tape operation
Inserting a tape
•
Turn on the set.
•
Insert a tape.
Eject
Insert cassette with side A or 1
facing up, the open side facing
cassette
to the right
The tape will be played in the direction used
last.
If TR1-PLAY is displayed, this means that
track 1 or A of the tape is played.
Ejecting a tape
•
Press
.
The cassette will be ejected.
30
Fast winding
Fast forward
•
Press FF (fast forward).
At the end of the tape, the set will
switch to the other track and start play-
ing it.
To stop fast forward:
•
press FR.
Fast rewind
•
Press FR (fast rewind).
When the tape has been completely
rewound, the set will start playing the
same track again.
To stop fast rewind:
•
press FF.
Switch-over to the other track
Press simultaneously
TR1-PLAY or TR2-PLAY on the display
Fast
Fast
rewind;
forward;
To stop:
To stop:
press FF
press FR
Autoreverse
If, while a tape is playing, you wish to switch
to the other track of that tape:
•
press FR and FF simultaneously.
At the end of the tape, the set will automati-
cally switch to the other track. The display will
show TR1-PLAY for track 1 or A and TR2-
PLAY for track 2 or B.
Note:
If there is too much tension on the tape during
playback, the set may switch to the other
track by itself. In this case check the condition
of the tape. Sometimes it helps to rewind the
cassette tape completely.
Tape equalisation switch for
MTL
The equalisation is done automatically.
Advertisement
Table of Contents
