If the message is sent, you hear a tone and the
display shows Msg sent.
If the message is not sent, you hear a low tone,
the display shows Send failed and returns to the
main TMS screen.
Note:
You can append a priority status and/or a
request reply to your message. See
Status and Request Reply of a New Text
Message
information.
Priority Status and Request Reply of a New Text
Message
Before sending your message, you can append a
priority status and/or a request reply to your message.
Appending a Priority Status to a Text Message
Note:
The Priority Status icon on a message does
not imply that the message gets higher priority
over the other messages when it is being
transmitted. It is just an indication that can be
embedded into a message to let the receiver
know that the message is important.
94
English
on page 94 for more
1 Press the Menu Select button directly below
Optn.
2
or
Select button directly below Sel to indicate the
message is important.
The priority status icon appears beside the normal
Priority
message icon on the label bar.
Removing a Priority Status from a Text Message
1 Press the Menu Select button directly below
Optn.
2
or
Select button directly below Sel to remove the
priority status from the message.
The display shows the normal message icon on the
label bar.
Appending a Request Reply to a Text Message
1 Press the Menu Select button directly below
Optn.
2
or
button directly below Sel to request for a reply.
to Mark Important and press the Menu
to Mark as Normal and press the Menu
to Req Reply and press the Menu Select