Sending An Emergency Alarm - Motorola APX 6000 2 User Manual

Note:
To exit emergency at any time, press and hold
the preprogrammed Emergency button for
about a second. This timer is programmable
from 0 – 6250 milliseconds by a qualified
technician.
The radio operates in the normal dispatch
manner while in Emergency Call, except if
enabled, it returns to one of the following:
Tactical/Non-
Revert
Non-Tactical/
Revert for
Conventional
system
Non-Tactical/
Revert for
Trunking
system
78
English
The radio sends
emergency alarm and/or
make emergency call on
the current selected
channel.
The radio reverts to the
preprogrammed
emergency channel to
send alarm and/or make
emergency call.
The radio reverts to the
preprogrammed
emergency talkgroup to
send alarm and/or make
emergency call.
Man Down is an alternate way to activate the
Emergency feature on the condition the Emergency
must be set up for this feature to operate.
See Man Down on page 85 for details.

Sending an Emergency Alarm

This feature allows you to send a data transmission,
which identifies the radio sending the emergency, to
the dispatcher.
Note:
The default timer of Emergency button press
to activate Emergency is 50 milliseconds. This
timer is programmable from 50 – 6200
milliseconds by a qualified technician.
Press the preprogrammed Emergency button.
One of the following scenarios occurs:
The display shows Emergency on the current
•
zone and channel. You hear a short medium-
pitched tone and the LED blinks red
momentarily.
• The radio sounds a short low-pitched tone to
indicate that the selected channel does not