Table of Contents
Advertisement
Press the Menu Select button directly below
MyID.
The display shows momentary Radio ID off, and
the radio alias disappears from the Home screen or
the display shows momentary Radio ID on, and the
radio alias appears on the Home screen.
Controlling the Display Backlight
You can enable or disable the radio's display
backlight as needed, if poor light conditions make the
display or keypad difficult to read.
Depending on how your radio is preprogrammed, you
can also maintain a minimum backlight level on the
radio's front display.
Note:
The backlight setting also affects the Menu
Select buttons and Navigation button
backlighting accordingly.
The backlight remains on for a
preprogrammed time before it automatically
turns off completely or returns to the minimum
backlight level.
Perform one of the following actions:
•
To toggle the backlight on or off, press the
preprogrammed Light/Flip button.
•
To turn the backlight on, press either the Menu
Select or Navigation button, or any
programmable radio controls or buttons.
Locking and Unlocking the Controls
Check with your dealer or qualified technician for best
selection to suit your usage.
1 Toggle the preprogrammed Keypad/Control Lock
button or switch to on.
The display shows Kypd/Ctrl Lock.
2 Toggle again to unlock the controls.
Turning the Controls and Buttons Tones On or Off
You can enable and disable the tones of Navigation
buttons and controls if needed.
Turning the tones on or off via the preprogrammed
•
Mute button:
a) To turn the tones off or on, press the
preprogrammed Mute button.
•
Turning the tones on or off via the radio menu:
145
English
Advertisement
Table of Contents
