Table of Contents
Advertisement
Note:
If Site Selectable Alert (SSA) is enabled, the
radio mutes any alert that is received when
entering the Geofence area and unmutes
when exiting.
Exiting Mission Critical Geofence
When the radio exits the Geofence area, the radio
reverts to the original transmit power level, intelligent
lighting, channel or newly assigned talkgroup. Voice
announcement is cancelled or the user hears a pre-
programmed VA tone. The radio displays the new
channel and a message is received to indicate the
changes.
Trunking System Controls
Operating in Failsoft System
The failsoft system ensures continuous radio
communication during a trunked system failure. If a
trunking system fails completely, the radio goes into
failsoft operation and automatically switches to its
failsoft channel.
During failsoft operation, your radio transmits and
receives in conventional operation on a
116
English
predetermined frequency. You hear a medium-
pitched tone and the display shows Failsoft.
When the trunking system returns to normal
operation, your radio automatically leaves failsoft
operation and returns to trunked operation.
To continue in Failsoft and to communicate with other
talkgroups, refer to the following procedure.
1 Rotate the Mode Knob to change to a different
repeater frequency.
2 Press the PTT button to talk, and release the
button to listen.
Out-of-Range Radio
When your radio goes out of the range of the system,
it can no longer lock onto a control channel.
You hear a low-pitched tone and/or the display shows
the currently selected zone/channel combination and
Out of range. Your radio remains in this out-of-
range condition until it locks onto a control channel, it
locks onto a failsoft channel, or it is turned off.
Advertisement
Table of Contents
