Reset The Default Settings - Rheem Iconic RTGH-S11i Training And Service Manual

IKONIC Tankless Water Heater Service Manual
GENERAL INFORMATION
1.7.4 RESET THE DEFAULT
SETTINGS
This tankless water heater can be reset to the default
settings of the water heater by completing the follow-
ing steps: (This will not affect accumulated values)
Confirming the previously observed alarms
(up to 6 alarms)
1. Press the " SERVICE " button.
SET POINT
BACK
SETTINGS
2. Press the "▼" or "▲" button until "Reset Defaults"
is displayed, and press the "ENTER" button.
BACK ENTER
SETTINGS STATUS SERVICE MODE
SET POINT
BACK
SETTINGS
Manifold Rotate
BACK
SETTINGS
3. The factory setting is "No". Press the "▼" or "▲"
button until Yes " is displayed, and press the " EN-
TER " button. To exit this setting, press " BACK "
button until the initial screen is displayed.
500 HOURS
BACK ENTER
SETTINGS STATUS SERVICE MODE
BACK
SETTINGS
ENTER
STATUS SERVICE MODE
MANIFOLD ROTATE?
BACK
SETTINGS STATUS
ENTER
STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
Yes
ENTER
STATUS SERVICE MODE
32
1.7.5 SETTING SERVICE ALERTS
Service alerts remind users of water heater mainte-
nance activities such as flushing the heat exchanger
or replacing the water treatment filter (if applicable) in
order to maximize the life of your tankless water heater.
1. Press the " SERVICE " button.
2. Press the "▼" or "▲" button until "Service Alert" is
displayed, and press the " ENTER " button.
ENTER
SERVICE MODE
Current Alarms
BACK
SETTINGS
3. The factory setting is " 500 Hours ". Every 500 com-
bustion hours, a service alert is provided. Press the
"▼" or "▲" button to choose "500 Hours", "750
Hours" or "1000 Hours" and press the "ENTER"
button to confirm.
To exit this setting, press "BACK" button until the
initial screen is displayed.
NOTE: Changing default 500 hours is NOT rec-
ommended.
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
Service Alert
BACK ENTER
SETTINGS STATUS SERVICE MODE
BACK ENTER
SETTINGS STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
500 HOURS
BACK ENTER
SETTINGS STATUS SERVICE MODE
MANIFOLD
BACK
SETTINGS STATUS
S