Table of Contents
Advertisement
IKONIC Tankless Water Heater Service Manual
GENERAL INFORMATION
4. The Factory setting is "None." Press the "▼" or
"▲" button until "Schedule" is displayed, and press
"ENTER" to confirm. To exit this setting, press
"BACK" button until the initial screen is displayed
displayed.
BACK
SETTINGS
NOTE: To use this schedule mode, Wi Wi-Fi is
required on this user interface. The specific
application should also be downloaded to
Recirc.Pump Modes
your smart phone. Please see "Wi Wi-Fi Set-
BACK
SETTINGS
ting" in the U&C manual to set Wi Wi-Fi on
this user interface and to download the appli-
cation.
1.6.5.2 MANUAL OPERATING
SET POINT
OF RECIRC . PUMP (FOR ON
ENTER
STATUS
SERVICE
MODE
DEMAND)
On demand mode allows the user to turn ON the recir-
culation pump manually.
1. Press the " SETTINGS " button .
BACK
SETTINGS
None
ENTER
STATUS
SERVICE
MODE
Schedule
ENTER
STATUS
SERVICE
MODE
SET POINT
BACK
SETTINGS
STATUS
ENTER
STATUS
SERVICE
MODE
Tankless Config
BACK
SETTINGS
STATUS
BACK
SETTINGS
STATUS
SET POINT
ENTER
STATUS
SERVICE
MODE
OFF
BACK
SETTINGS
STATUS
26
2. Press the " ▼ " or " ▲ " button until "Tankless Con-
fig." is displayed, and press the " ENTER " button.
If incorrect setting is entered at any steps, press
the " BACK " button until the initial screen. Redo
from step 1.
ENTER
SERVICE
MODE
3. Press the " ▼ " or " ▲ " button until "Recirc . Pump"
is displayed, and, press "ENTER" to confirm.
ENTER
SERVICE
MODE
None
ENTER
4. The Factory setting is "Disabled". Press the "▼"
SERVICE
MODE
or "▲" button until "Enable" is displayed and
press the "Enter" button. To exit the setting, press
"BACK" button until the initial screen is displayed.
ENTER
SERVICE
MODE
Tankless Config
BACK
ENTER
SETTINGS
STATUS
SERVICE
MODE
Recirc.Pump Modes
BACK
ENTER
SETTINGS
STATUS
SERVICE
MODE
OFF
BACK
ENTER
SETTINGS
STATUS
SERVICE
MODE
Enable
BACK
ENTER
SETTINGS
STATUS
SERVICE
MODE
SET POINT
BACK
ENTER
SETTINGS
STATUS
SERVICE
MODE
Rec
BA
SETT
BACK
SETTIN
Hide quick links:
Advertisement
Table of Contents
