Sharp MX-B468P User Manual page 77

Use printer menus
Menu item
TLS Support
Enable TLSv1.0 (Off)
Enable TLSv1.1 (Off*)
Enable TLSv1.2 (On*)
SSL Cipher List
TLSv1.3 SSL Cipher List
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
SNMP Versions 1 and 2c
Enabled
Off
On*
Allow SNMP Set
Off
On*
Enable PPM MIB
Off
On*
SNMP Community
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Enable the Transport Layer Security protocol.
Specify the cipher algorithms to use for the SSL or the TLS connections.
Specify the specific cipher string to use for TLS v1.3.
Description
Configure Simple Network Management Protocol (SNMP) versions 1
and 2c to install print drivers and applications.
77