Sharp MX-B468P User Manual page 76

Use printer menus
Menu item
Set Hostname
Domain Name
Allow DHCP/BOOTP to update
NTP server
On*
Off
Zero Configuration Name
Enable Auto IP
Off
On*
DNS Address
Backup DNS
Backup DNS 2
Backup DNS 3
Domain Search Order
Enable DDNS
Off*
On
DDNS TTL
Default TTL
DDNS Refresh Time
Enable mDNS
Off
On*
WINS Server Address
Enable BOOTP
Off*
On
MTU
256–1500 Ethernet (1500*)
Raw Print Port
1–65535 (9100*)
Outbound Traffic Maximum
Speed
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the current TCP/IP host name.
Set the domain name.
Allow the DHCP and BOOTP clients to update the NTP settings of the printer.
Specify a service name for the zero configuration network.
Assign an IP address automatically.
Specify the current Domain Name System (DNS) server address.
Specify the backup DNS server addresses.
Specify a list of domain names to locate the printer and its resources that reside
in different domains on the network.
Update the Dynamic DNS settings.
Specify the current DDNS settings.
Update the multicast DNS settings.
Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign a printer IP address.
Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Specify a raw port number for printers connected on a network.
Set the maximum transfer rate of the printer.
Note: When enabled, the option for this setting is 100–1000000
Kilobits/second.
76