Sharp MX-B468P User Manual page 51

Use printer menus
Remote Operator Panel
Menu item
External VNC Connection
Don't Allow*
Allow
Authentication Type
None*
Standard Authentication
VNC Password
Note: An asterisk (*) next to a value indicates the factory default setting.
Notifications
Menu item
Alarm Control
Off
Single*
Continuous
Supplies
Show Supply Estimates
Show estimates*
Do not show estimates
Supplies
Cartridge Alarm
Off
Single*
Continuous
Supplies
Custom Supply Notifications
E‑mail Alerts Setup
E‑mail Setup
Primary SMTP Gateway
E‑mail Alerts Setup
E‑mail Setup
Primary SMTP Gateway Port (25*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Connect an external Virtual Network Computing (VNC) client
to the remote control panel.
Set the authentication type when accessing the VNC client
server.
Specify the password to connect to the VNC client server.
Note: This menu item appears only if Authentication Type is
set to Standard Authentication.
Description
Set the number of times that the alarm sounds when the printer
requires user intervention.
Show the estimated status of the supplies.
Set the number of times that the alarm sounds when the
cartridge is low.
Configure notification settings when the printer requires user
intervention.
Note: This menu item appears only in the Embedded Web
Server.
Type the IP address or host name of the primary SMTP server
for sending e-mail.
Enter the port number of the primary SMTP server.
51