Nedis ACAM51BK - Action Cam Manual

Recording time

The approximate recording time is an indication of how much video length can be saved on the microSD card, depending on the video quality.

The maximum video length cannot be recorded on a single battery charge.

Intended use

This product is a small and lightweight action camera that captures 4K Ultra HD images and video.

Connect the product to the N-go 4K app to manage your photos, videos and settings.

This product is intended for indoor and outdoor use.

This product is intended as a recording device.

Any modification of the product may have consequences for safety, warranty and proper functioning.

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.

Main parts (image A)

1. Power / Mode button
2. OK button
3. Camera lens
4. Front display
5. Back display
6. Charging indicator LED
7. Status indicator LED
8. Battery cover
9. Up button
10. Down button
11. Speaker
12. USB-C port
13. MicroSD card slot
14. MicroSD HDMI port
15. Microphone

Additional parts (not shown in illustration)

16. Battery
17. Waterproof housing
18. Mounting accessories (×9)
19. Bandages
20. USB-C cable
21. 3M mats
22. Tethers
23. Lens cloth

Safety instructions

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
• Only use the product as described in this manual.
• Do not open the product, there are no user serviceable parts inside.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• Do not expose the product to water or moisture.
• Do not dismantle, open or shred batteries.
• Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
• In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• Properly dispose of the empty battery.
• Seek medical advice immediately if a cell or a battery has been swallowed.
• Battery usage by children should be supervised.
• Only purchase the appropriate replacement battery from the Nedis website.
• Observe the charging terminals on the battery and the product and ensure correct use.

Insert or change memory card (image B)

A microSD card (not included) is required to store pictures or videos. Insert the microSD card into the microSD card slot Ar .

Use a microSD card with a maximum of 64 GB storage capacity.

Format the microSD card before use.

Formatting the microSD card will remove all files from the microSD card. Make sure to back up all files you want to keep before formatting the microSD card.

Charging the battery (image C)

Charge the camera from any USB outlet with the supplied USB-C cable. The camera can be charged while recording video. Fully charging the battery takes about 3 hours.

Attaching the product to the accessories

Insert the product into the waterproof housing.

The product is not waterproof without the waterproof housing.

The waterproof housing A can be fitted with the supplied mounting accessories to your clothing, action gear, helmet, etc.

Make sure the attachment is secure.

Make sure the camera does not impede your movement, view, or operation of your action gear.

Switching on the product

Hold the power button A for about 3 seconds until the status indicator LED A lights up blue. A welcome screen appears, and the camera enters video mode.

Switching between the modes

Press the power / mode button A to switch between the modes of the product.

Before first use

		Video mode
		Picture mode
		Slow motion mode
		Playback mode
		Setup mode

Record pictures and video images

In video mode, press the OK button A to start or stop recording a video. In picture mode, press the OK button A to take a picture.

View pictures and video images

In playback mode, press the up button A or down button A to go to the next or previous picture or video.

Press the OK button A to play and stop videos.

Settings menu navigation

• Press the OK button A in the setup mode to enter the settings menu. In the settings menu:
• Press the power / mode button A to select the mode tab.
• Press the up button A and the down button A to navigate between the options.
• Press the OK button A to select and confirm the desired option.

For a description of the settings menu, consult the extended manual online.

Transfer files to external device

Connect the product to your device with the USB-C cable A. Transfer the files you want to save to your device.

Alternatively, remove the microSD card from the microSD card slot A and insert the microSD card into a card reader that is connected to your device.

Use with N-Go 4K App

Use the N-Go 4K App on your mobile device to review images and videos, transfer them to your mobile device, take pictures, record video, toggle picture and video modes and change settings.

The app works best with iPhone or Android version 8.0 and up.

For more information about how the app works, consult the extended manual online.

1. Switch on the product.
2. Press and hold the up button A for 3 seconds to activate Wi-Fi.
3. Install and open the N-go 4K App. Select Wi-Fi network N-Go 4K. Enter password 12345678 to connect.

Alternatively:

1. Switch on the product.
2. Press the power / mode button A to switch between the modes of the product.
3. Press the OK button A in the setup mode to enter the settings menu.
4. Press the power / mode button A to select Wi-Fi mode.
5. Press the OK button A to activate Wi-Fi on the product.
6. Install and open the N-go 4K App. Select Wi-Fi network N-Go 4K. Enter password 12345678 to connect.

Once the connection is established, you see the live view of the camera. You can now control the camera with the app.

Wi-Fi has to be switched on to use the product with the N-go 4K app.

• Tap the record button in the bottom to start or stop recording a video.
• Tap the camera button to take a picture.
• Tap the slow motion button to record a slow motion video.
• Tap the media gallery button in the bottom left to review, delete or download pictures and videos to your mobile device.
• Tap the settings icon in the bottom right to enter the setup menu.

View pictures and video images on external device

To view the pictures and video images on a TV or monitor without transferring any files:

1. Plug an HDMI cable into the Micro HDMI port A.

The HDMI cable is not included.

2. Plug the other end of the HDMI cable into the external device.

Switching off the product

Hold the power / mode button A for 3 seconds to switch off the product. When possible, remove the battery from the product when not in use.

Replacing the battery (image D)

1. Open the battery cover A.
2. Remove the empty or damaged battery.
3. Place the new battery in the battery compartment.

Only purchase the appropriate replacement battery from the Nedis website.

4. Close the battery cover A.

Disposal

The product is designated for separate collection at an appropriate collection point.
Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible for the waste management.