Nedis ACAM41BK - Action Camera Quick Start Guide

Table of Contents

Contents

1 Intended use
2 Parts list
3 Additional parts (not shown in illustration)
4 Safety instructions
5 Insert or change memory card
6 Battery
7 Turn on camera
8 Switching between modes
9 Attachment
10 Record pictures and video images
11 View pictures and video images
12 Settings menu navigation
13 Transfer files to external device.
14 Use with N-go 4K App
15 View pictures and video images on external device
16 Specifications
17 Approximate recording time
18 Declaration of Conformity
19 Documents / Resources
- 19.1 References
- 19.2 Download manual

Intended use

This product is intended as a recording device.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Parts list

(Image A)
Parts list

OK button
Power indicator LED
Power button
Camera lens
UP button

DOWN button
Speaker
Display
Charging indicator LED q Status indicator LED
Battery cover
Microphone
Micro USB port
MicroSD card slot
HDMI port

Additional parts (not shown in illustration)

Battery
Waterproof housing
Mounting accessories (x10)
Bandages
Micro USB cable
3M mats
Tethers
Lens cloth

Safety instructions

Only use the product as described in this manual.
Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the electrical outlet and other equipment if problems occur.
Do not expose the product to water or moisture.

Insert or change memory card

(Image B)
Insert or change memory card
A microSD card (not included) is required to take pictures or videos. Insert the microSD card into the microSD card slot .
information Use a microSD card with a maximum of 64 GB storage capacity.
Format the microSD card before use.

Battery

(Image C)
Battery
Charge the camera from any USB outlet with the supplied micro USB cable. The camera can be charged while recording video. Fully charging the battery takes about 3 hours.
information When battery level is low, a low battery notification is shown on the screen and the camera turns off.

Turn on camera

Hold the power button for about 3 seconds until the status indicator LED q lights up blue. A welcome screen appears, and the camera enters video mode.

Switching between modes

		Video mode
		Picture mode
		Slow motion mode
		Playback mode
		Setup mode

Switch between modes by pressing the power button .

Attachment

Attach the action camera into the protective casing. The protective casing can be fitted with supplied mounting accessory to your clothing, action gear, helmet, etc.

Record pictures and video images

In video mode, press OK to start or stop recording video. In picture mode, press OK to take a picture.

View pictures and video images

In view mode, press UP or DOWN to go to the next or previous picture or video. Press OK to play and stop videos.

In the settings menu, use UP and DOWN to navigate between options. Press OK to select and confirm options.
information For a description of the settings menu, consult the extended manual online.

Transfer files to external device.

Connect the camera to your device with the micro USB cable. Transfer files you want to save to your device.
Alternatively, take the microSD card from your camera and insert it into a card reader that is connected to your device.

Use with N-go 4K App

Use the N-go 4K App on your mobile device to review images and videos, transfer them to your mobile device, take pictures, record video, toggle picture and video modes and change settings.
The app works best with iPhone or Android version 8.0 and up.
For more information about how the app works, consult the extended manual online.

Switch on your camera. Press UP to activate Wi-Fi.
Install and open the N-go 4K App. Select Wi-Fi network N-Go 4K. Enter password 12345678 to connect.
Once the connection is established, you see the live view of the camera. You can now control the camera with the app.
When you are done, press UP on the camera to return to the video or picture mode.

View pictures and video images on external device

information Ultra HD cable is not included.
To view the pictures and video images on a TV or monitor without transferring any files, connect the camera with an ultra HD cable to the external device.

Specifications

Product	Action camera
Article number	ACAM41BK
Dimensions (l x w x h)	60 x 31 x 41 mm
Battery Capacity	900 mAh
Memory	MicroSD card (16 - 64 GB) (not included)
Camera lens	Viewing angle = 140 degrees
Image format	.jpg
Image resolution	0.3 MP - 16 MP
Video format	.mp4
Video resolution	720P, 1080P, 2.7K, 4K
Time lapse	Up to 30 seconds
Display	2.0 LTPS
Current	Standby: 260 mAh Working: 460 mAh
Charging time	3 hours
Frequency bandwidth	2.4 GHz
Maximum Transmission power	14 dBm

Approximate recording time

The approximate recording time is an indication of how much video length can be saved on the microSD card, depending on the video quality.
information The maximum video length cannot be recorded on a single battery charge.

MicroSD card	720p, 120 fps	1080p, 30 fps	4K, 30 fps
16 GB	95 minutes	140 minutes	90 minutes
32 GB	180 minutes	270 minutes	170 minutes
64 GB	340 minutes	520 minutes	320 minutes

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product ACAM41BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/ACAM41BK#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands