Nedis ACAM11BK - Action Cam HD 720p Quick Start Guide

Table of Contents

Contents

1 Intended use
2 Parts list
3 Safety instructions
4 Insert or change memory card
5 Battery
6 Turn on camera
7 Switching between modes
8 Attachment
9 Record pictures and video images
10 View pictures and video images
11 Settings menu navigation
12 Transfer files to external device.
13 Specifications
14 Documents / Resources
- 14.1 Download manual

Intended use

This product is intended as a recording device. Any modification of the product may have consequences for safety, warranty and proper functioning.

Parts list

(Image A)
Parts list

OK button
Power indicator LED
Power button
Camera lens
UP button

DOWN button
Speaker
Display
Charging indicator LED
Status indicator LED
Battery cover
Microphone
Micro USB port
MicroSD card slot

Additional parts (not shown in illustration)

Battery
Waterproof housing
Mounting accessories (x5)
Bandages
Micro USB cable
3M mats

Safety instructions

Only use the product as described in this manual.
Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the electrical outlet and other equipment if problems occur.
Do not expose the product to water or moisture.

Insert or change memory card

Insert or change memory card
A microSD card (not included) is required to take pictures or videos. Insert the microSD card into the microSD card slot .
information Use a microSD card with a maximum of 32 GB storage capacity.
Format the microSD card before use.

Battery

(Image C)
Battery
Charge the camera from any USB outlet with the supplied micro USB cable. The camera can be charged while recording video. Fully charging the battery takes about 3 hours.
information When battery level is low, a low battery notification is shown on the screen and the camera turns off.

Turn on camera

Hold the power button for about 3 seconds until the status indicator LED lights up blue. A welcome screen appears, and the camera enters video mode.

Switching between modes

		Video mode
		Picture mode
		Playback mode
		Setup mode

Switch between modes by pressing the power button .

Attachment

Attach the action camera into the protective casing. The protective casing can be fitted with supplied mounting accessory to your clothing, action gear, helmet, etc.

Record pictures and video images

In video mode, press OK to start or stop recording video. In picture mode, press OK to take a picture.

View pictures and video images

In view mode, press UP or DOWN to go to the next or previous picture or video. Press OK to play and stop videos.

In the settings menu, use UP and DOWN to navigate between options. Press OK to select and confirm options.
information For a description of the settings menu, consult the extended manual online.

Transfer files to external device.

Connect the camera to your device with the micro USB cable. Transfer files you want to save to your device. Alternatively, take the microSD card from your camera and insert it into a card reader that is connected to your device.

Specifications

Product	Action camera
Article number	ACAM11BK
Dimensions (l x w x h)	60 x 31 x 41 mm
Battery Capacity	900 mAh
Memory	MicroSD card (2 - 32 GB) (not included)
Camera lens	Viewing angle = 100 degrees
Image format	.jpg
Image resolution	0.3 MP - 5 MP
Video format	.avi
Video resolution	640 x 480 px - 1280 x 720 px
Frame speed	30 fps
Recording time	≥ 1.5 hours
Display	2.0 LTPS
Current	Standby: 170 mAh Working: 190 mAh
Charging time	3 hours