Staple - Ricoh CL7000 Introduction Manual

Note
If you are using Windows 95/98/Me, this mode is called "Color/Black and White".
You can select the following items:
Color
Prints color documents in full color.
Note
Color images are printed using CMYK toner, Cyan, Magenta, Yellow, and Black. CMYK repre-
sents the three primary subtractive colors.
If you want to adjust the print color, use the settings in the [Advanced] dialog box accessed from
the [Advanced] button on the [Print Quality] tab.
Black and White
Prints everything, including color documents, in black and white. Black and White printing is faster
than Color. To stop black and white areas being printed with CMYK toner, select [Black and White]
in the printer driver as well as in the application.

Staple

Use this function to staple output. When you turn staple on, the printed document is collated automat-
ically. You should switch off Collate from the [Print] window of your application to prevent the entire
job being stapled together.
Limitation
To use this function, the finisher must be installed on the printer.
The memory unit of total 128 MB or the optional hard disk drive must be installed on the printer.
20