Paper Recommendations; Loading Paper; Storing Paper; Types Of Paper And Other Media - Ricoh AP610N Maintenance Manual

Paper and Other Media

Paper Recommendations

Loading Paper

❒ Do not use ink-jet printer paper because it may stick to the fusing unit and
cause a paper misfeed.
❒ When printing on OHP transparencies that have a print side, load them with
the print side over on the bypass tray. Not taking this precaution may cause
them to stick to the fusing unit and cause misfeeds.
❒ Set the paper as described below
• Tray 1: Print side facing down
• Bypass Tray: Print side facing up
• Paper Feed Unit (Tray 2, Tray 3): Print side facing down
❒ Print quality cannot be guaranteed if paper other than the ones recommended
is used. For more information about recommended paper, contact your sales
or service representative.
❒ Do not use paper that has already been printed onto by other printers.

Storing Paper

• Paper should always be stored properly. Improperly stored paper might result
in poor print quality, paper misfeeds, or printer damage. Recommendations
are as follows:
• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.
• Keep paper in the package in which the paper came.

Types of Paper and Other Media

Plain Paper
Paper thickness
Printer setup
Printer driver setup
2
60 - 105 g/m (16 - 28 lb.)
Press [Paper Input] menu, [Paper Type], and then [Plain Paper].
❒ The paper type selected using the printer driver overrides that
selected using the control panel.
Click [Plain] or [Plain & Recycled] in the [Type:] list.
10