Ricoh AP610N Maintenance Manual page 36

Paper and Other Media
D
Push the bottom plate down until it locks into place.
E
Load envelopes into the envelope feeder unit, with the print side down
and the flap on the left as shown in the illustration.
❒ Confirm that the envelope flaps are securely folded down, and that there is
no air inside the envelopes.
❒ Confirm that the top of the stack is not higher than the limit mark on the side
guides.
❒ Confirm that the envelopes fit under the side guides.
❒ Do not push the stack of envelopes with too much force.
36