Adjusting The Printer; Adjusting The Image Density - Ricoh AP610N Maintenance Manual

Adjusting the Printer

Adjusting the Image Density

You can adjust the Image Density when the print side of the page is a shaded or
print image is too light.
❒ Extreme settings may create printouts that appear dirty.
❒ Image Density settings should be made from the application or the printer
driver whenever possible.
A
Press the {Menu} key.
The [Menu] screen appears on the display.
B
Press the{U} or {T} key to display [Maintenance], and then press the {#
Enter} key.
Menu:
Maintenance
The maintenance menu appears.
C
Check [Image Density] is displayed, and then press the {# Enter} key.
D
Press the {U} or {T} key to set the Image Density value.
Image Density:
(-3 +3)
❒ To maintain a darker image under high volume printing conditions, we
highly recommended that you select 3 from the control panel.
❒ You can adjust the image density in seven steps from -3 to +3. Increasing
the value makes the printouts darker and decreasing the value makes the
printouts lighter.
E
Press the {# Enter} key.
G1128611A_1.10
0
Copyright © 2004, 2005
70