Configuring the Printer for the Network
Installing IP Peer-to-Peer
The TCP/IP protocol is required for IP Peer-to-Peer printing. Confirm that the
TCP/IP protocol is installed, if not, install it before starting the following proce-
dure.
Follow these steps to install IP Peer-to-Peer.
Important
Confirm that the printer power is turned on before starting the following pro-
cedure.
3
A
Insert the CD-ROM labeled "Print Server Software and Documentation" in
the CD-ROM drive.
The main screen appears.
Note
If Adobe Acrobat Reader 3.0 is not installed, click [Install Adobe Acrobat
Reader 3.0].
B
Click [CD ROM Contents].
The "Introduction" page appears.
C
Click [Installation/Configuration Programs].
The "Configuration Programs" page appears.
D
Click [Windows 95/98 & NT 4.x IP Peer-to-Peer Printing].
The "Windows 95/98 and NT 4.x IP Peer-to-Peer Printing" page appears.
This screen describes the functions of this utility.
E
At the bottom of the page, click the blue word [here] to begin installing.
A dialog box appears asking if the "Setup.exe" program should be started.
F
Click [Yes] to continue.
The [Welcome] dialog box appears.
G
Click [Next] to continue.
The [Installation Notes] dialog box appears.
H
Click [Yes] to continue installation.
The [Choose Destination Directory] dialog box appears.
I
Click [Browse] to set a different folder.
The default installation folder is C:\PROGRAM FILES\IP-P2P.
J
Click [Next] to continue.
The [Select Program Folder] dialog box appears.
This allows you to set the name of the folder that contains the shortcut links
inside the Program Folder.
32