Punch, Punchhole - Ricoh AP410 Supplementary Manual

UNIX Configuration
Position
Left top horiz
Left top slant
1
Left top vert
Right top horiz
Right top slant
Right top vert
Left 2
Right 2
Top 2
Booklet
The following sample shows how to print with the staple on the upper left using
finisher shift tray (host name : nphost, file name : file1, finisher shift tray: finish-
erproof):
• rsh
% rsh nphost print staple=lefttop,outbin=finisherproof <
file1
• rcp
% rcp file1 nphost:staple=lefttop,outbin=finisherproof
• ftp
ftp> put file1 staple=lefttop,outbin=finisherproof

Punch, Punchhole

Select the punch position for the output and the number of punch holes.
Limitation
❒ When using this option, the optional finisher unit is required.
Note
❒ Available punch positions may vary depending the type of installed output
tray. For more information about punch, see the manual that comes with this
machine.
❒ When "punchhole" is not specified, the machine executes the punch function
by the default number of punch holes.
❒ When "punchhole" is not specified correctly, the machine does not execute
the function.
punch=value of punch position
Position
Off
28
Value
lefttophorizland, lefttophorizport
lefttopslantland, lefttopslantlport
lefttopvertland, lefttopvertport
righttophorizland, righttophorizport
righttopslantland, righttopslantport
righttopvertland, righttopvertport
left2land, left2port
right2land, right2port
top2land, top2port
booklet
Value
off