LENCO DIR-140 User Manual page 21

Alarm
There are 3 independent Alarms which can be set. 2 different Alarms
(Alarm 1, Alarm 2) and one NAP alarm which is a countdown alarm which can be
used when doing a quick sleep.
Press the Alarm button on the remote control to enter the alarm settings menu
directly and follow the following steps.
Setting the alarm
-
-
-
-
-
-
-
-
Repeat the above steps to setup the alarm 2
Setting the NAP alarm
-
-
-
-
When the NAP alarm is activated you see a clock icon on the lower right corner
with the remaining time.
Timer Countdown timer (max. 100min)
Scheduled Select "Turn On" to set specific station playing time.
Playing ○ Turn on
Repeat: You can select "Everyday", "Once", "Mon", "Tue", "Wed", "Thu", "Fri",
Press 'Alarm' button on the unit or remote.
Select Alarm 1
Select Turn On
Press the 'OK' button on the remote or press the navigation wheel on the
unit.
Press the 'OK' on the "Repeat:" option and select the how the alarm should
work.
(Everyday, once or select the required days)
Press the left arrow key on the remote or unit to return to the previous alarm
menu
then select "Time:" and press 'OK'
You now can use the up down buttons to change the highlighted Hours then
press the right arrow button once to switch to the Minutes and use the
up/down buttons to change the minutes. Press the 'OK' button to confirm.
Select the "Sound:" and press the 'OK' button. Now you can choose
fromBeep, Melody, Internet radio, FM, DAB/DAB+.
When internet radio is selected as wake up sound, you can use one of your
favorite radio stations (which have to be stored as favorite on the DIR-140
(V2)).
Note: when no internet connection is available within 1 minute after the
alarm is activated, the DIR-140 (V2) will automatically switch to Melody.
Press 'Alarm' button on the unit or remote.
Select NAP alarm
Use the up/down buttons to choose the desired minutes.
You can choose 5/10/20/30/60/90 or 120 minutes and then press the 'ok'
button to select
Press the left arrow button to return to the main screen.
21