LENCO DIR-140 User Manual page 20

CONFIGURATION
Time Display Analog/digital
Manage When it is enabled, my mediaU will show on the main menu. If various mediaU
mymediaU accounts exist in the Radio, Select the default login account in here.
Network Wireless Network Configuration: Enable/disable WiFi network.When you enable
the WiFi network, the system will automatically select the required AP.Enter WEP
or WPA code to connect the WiFi.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS button, you
can set up the network connection easily via WPS function.Enter it and go to press
the WPS/QSS button on your router within 120 seconds.The connection between
the router and device will then be configured automatically.
Manual Configuration: You can choose DHCP (which assignes the ip address
automatically) or manually input the IP address for wireless network
connection.The following information has to be entered: SSID (nameof access
point),IP Address,subnet mask,default gateway,preferred DNS server,alternate DNS
server.
Check Network When Power On: Enable/disable WiFi network.When you enable
the WiFi network, the system will automatically search for available AP.Select the
required AP.
Date & Time Set the date and time
Set time format display as 12 Hour or 24 Hour
Set date format (YYYY/MM/DD-DD/MM/YYYY-MM/DD/YYYY)
Daylight Saving Time (DST)
○ ON
Tips: When "ON" is selected, the time will be one hourlater than the current time.
○ OFF
Tips: When "OFF" is selected, the time will be same as the current time. If it was
already in "Daylight Saving Time(DST)" and you choose"OFF",the time will be
deducted by one hour,that's to say,the time will be same as the actual time.
20