Fm Radio - Panasonic SC-PM700 Owner's Manual

Cd stereo system
Table of Contents

Advertisement

Available languages

Available languages

Input level
BLUETOOTH
You can change the input level setting if the sound input
level of the Bluetooth transmission is too low.
1
Press [PLAY MENU] repeatedly to select
"INPUT LEVEL".
2
Press [R, T] to select the level and then press
[OK].
(default)
Note:
Select "LEVEL 0" if the sound is interrupted.
Note on disc
• This system can play CD-R/RW with CD-DA or MP3
format content.
• Before playback, finalize the disc on the device it was
recorded on.
• Some CD-R/RW cannot be played because of the
condition of the recording.
• This system does not guarantee play of all types of
discs.
Note on USB device
• This system does not guarantee connection with all
USB devices.
• This system supports USB 2.0 full-speed.
• This system can support USB devices of up to 32 GB.
• Only FAT 12/16/32 file system is supported.
Note on MP3 file
• Files are defined as tracks and folders are defined as
albums.
• Tracks must have the extension ".mp3" or ".MP3".
• Tracks will not necessarily be played in the order you
recorded them.
• Some files can fail to work because of the sector size.
• This system does not guarantee play of all MP3s.
MP3 file on disc
• This system can access up to:
– 255 albums (including root folder)
– 999 tracks
– 20 sessions
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
MP3 file on USB device
• This system can access up to:
– 800 albums (including root folder)
– 8000 tracks
– 999 tracks in one album

FM Radio

Preparation
Press [RADIO].
Manual tuning
1
Press [PLAY MENU] repeatedly to select
"TUNE MODE".
2
Press [R, T] to select "MANUAL" and then press
[OK].
3
Press [2/3] or [5/6] to tune in to the
station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
"STEREO" is shown when a stereo broadcast is being
received.
Memory presetting
You can preset up to 30 FM stations.
Automatic presetting
1
Press [PLAY MENU] repeatedly to select
"A.PRESET".
2
Press [R, T] to select "LOWEST" or "CURRENT"
and then press [OK].
LOWEST
Tuning begins from the lowest
frequency.
CURRENT Tuning begins from the current
frequency.
The tuner presets all the stations it can receive into the
channels in ascending order.
To cancel, press [8].
Manual presetting
1
Press [PLAY MENU] repeatedly to select
"TUNE MODE".
2
Press [R, T] to select "MANUAL" and then press
[OK].
3
Press [2/3] or [5/6] to tune in to the
station.
4
Press [OK].
5
Press [R, T] to select a preset number and then
press [OK].
Do steps 3 through 5 again to preset more stations.
The new station replaces any station that occupies the
same preset number.
9

Advertisement

Table of Contents
loading

Table of Contents