Fm Radio; [Pmx92] Dab/Dab - Panasonic SC-PMX92 Operating Instructions Manual

FM radio

30 FM stations can be preset.
Preparation
Press [RADIO, EXT-IN] repeatedly to select "FM".
Automatic presetting
1
Press [RADIO MENU] to select "A.PRESET".
2
Press [2, 1] to select "LOWEST" or
"CURRENT" frequency.
LOWEST:
To begin auto preset with the lowest frequency (FM
87.50).
CURRENT:
To begin auto preset with the current frequency.*
3
Press [OK] to start presetting.
• The tuner starts to preset all the stations it can receive
into the channels in ascending order.
To cancel, press [∫].
*1: To change the frequency, refer to "Manual tuning and
presetting".
Manual tuning and presetting
1
Press [6] or [5] to tune in to the station.
• Alternatively, press [:/6] or [5/9] on the
main unit when "MANUAL" is selected as the tune
mode* 2 .
To tune automatically, press and hold the button until
the frequency starts changing quickly.
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
Selecting a preset station
Press the numeric buttons, [:] or [9] to select
the preset station.
• Alternatively, press [:/6] or [5/9] on the main
unit when "PRESET" is selected as the tune mode*
*2: To change the tune mode
1 Press [RADIO MENU] repeatedly to select "TUNE
MODE".
2 Press [2, 1] to select "MANUAL" or "PRESET", and
then press [OK].
To display the current FM signal status
For Continental Europe:
Press [DISPLAY] repeatedly to select "FM STATUS".
For others:
Press [DISPLAY].
"FM ST": FM stereo broadcast is being received.
"FM - - - -": No broadcast is received or FM broadcast
received is weak or in monaural.
"FM MONO": You have set the "FM MODE" to
"MONO". (
during FM reception.")
Note:
• "STEREO" is displayed when this unit tunes to a stereo
broadcast.
1
RDS broadcasting
(For Continental Europe only)
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY] repeatedly.
"PS": Programme service
"PTY": Programme type
"FREQ": Frequency
Note:
• RDS is available only when stereo works in reception.
• RDS may not be available if reception is poor.

[PMX92] DAB/DAB+

Preparation
Press [RADIO, EXT-IN] repeatedly to select "DAB+".
If you select "DAB+" for the first time, the system will
start the "DAB AUTO SCAN" procedure.
Note:
• If no station is detected, "SCAN FAILED" is shown.
Adjust the antenna and try again.
DAB/DAB+ auto scan
1
Press [RADIO MENU] to select "AUTOSCAN" and
then press [OK].
2 .
"START?" is shown.
2
Press [OK].
"DAB AUTO SCAN" is shown.
DAB/DAB+ manual tuning
To find the best antenna position, use manual tuning to
search selected DAB/DAB+ frequency block.
1
Press [RADIO MENU] repeatedly to select
"MANUAL SCAN".
2
Press [2, 1] to select a frequency block to scan
and then press [OK].
Memory presetting
12, "If noise is excessive
You can preset up to 20 DAB/DAB+ stations.
1
Press [6] or [5] to select a station.
• Alternatively, press [:/6] or [5/9] on the
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
Note:
• A station previously stored is overwritten when another
station is stored in the same preset number.
• You cannot preset a station when the station is not
broadcasting or when you have selected a secondary
service.
• Previous station memory is cleared during auto scan.
Selecting a preset station
Press the numeric buttons, [:] or [9] to select
the preset station.
• Alternatively, press [:/6] or [5/9] on the main
unit when "PRESET" is selected as the tune mode*
*1: To change the tune mode
main unit when "STATION" is selected as the tune
mode* .
1
1 Press [RADIO MENU] repeatedly to select "TUNE
MODE".
2 Press [2, 1] to select "STATION" or "PRESET", and
then press [OK].
1 .
9