Reebok FR30 FLOATRIDE+ Manual page 13

ENG
CONSOLE FR30
1
2
3
4
5
TIME
1
DISTANCE
2
RESISTANCE/RPM
3
SPEED
4
START/PAUSE
5
Start, pause or hold to reset.
(-)DOWN
6
Adjust function value down.
24 FLOATRIDE+ FR30 BIKE
FR30 BIKE (RVFR-10500) PRINT MANUAL V11 24.04.23.indd 24-25 FR30 BIKE (RVFR-10500) PRINT MANUAL V11 24.04.23.indd 24-25
9
10
11
6 7 8
MODE
7
Switch function, or press to enter
heart rate recovery
(+)UP
8
Adjust function value up.
CALORIES
9
WATT/HEART RATE
10
RESET
11
Press the button to return or reset.
Press and hold to restart.
COMPUTER PROGRAMS
QUICK START
Press START/PAUSE to begin workout. Adjust resistance
)32 levels( at any time by pressing +/- .
MANUAL MODE (P01)
• In standby, press (M) MODE to highlight P01, then press START/PAUSE
to start workout. All values of TIME/DISTANCE/CALORIES will count up
from zero
• In standby, press (M) MODE to highlight P01, and then press (M) MODE
again to highlight TIME/DISTANCE/CALORIES. Press +/- to adjust vaues
If the value is set above zero, press START/PAUSE to start workout, and
•
all values will count down
• When completed, the console will display "End" and beep.
• Press RESET to enter main interface
PRESET PROGRAMS (P02 – P19)
• In standby, press (M) MODE to highlight P01, then press +/- to select
P02 – P19
• Press (M) MODE again to enter. Adjust TIME/DISTANCE/CALORIES
values, or do not set parameters and press START/PAUSE to train
• User can select the 18 programs to exercise according to individual
needs
+/-
• Press to change the program resistance level at any time
during exercise
• Machine will beep constantly and show END when the program
is finished
BODYFAT TEST (P20)
+/-
• In standby, press MODE to highlight P01, then press to
select P20
+/-
• Press MODE to enter information. Set value with from F-1 to F-4
F-1 SEX 01 MALE, 02 FEMALE
F-2 AGE 10 – 99
F-3 HEIGHT 100 – 200CM (40 – 80 IN)
F-4 WEIGHT 20 – 150KG (44 – 330LB)
• Press (M) MODE to enter F-5 )F-5 BODY FAT TEST(,
hold hands on the hand pulse sensors, the console
will display your body fat value.
≤19 UNDER WEIGHT
(20 – 25) NORMAL WEIGHT
(26 – 29) OVERWEIGHT
≥30 OBESE
The body fat value is intended as a guide, and is not medical data.
HEART RATE CONTROL MODE (P21-P23)
In standby, press (M) MODE to highlight P01, then press +/-
• to select
P21-P23. Press (M) MODE again to enter
+/-
• Press buttons to set age )console will calculate maximum heart rate
according to age(
• Press (M) MODE and +/- to set TIME, DISTANCE, CALORIES; then
press START/PAUSE and place both hands on the pulse sensors
to start workout
Console will record the TARGET HEART RATE and allow user to work out
within this, the resistance level will automatically be adjusted according to
the heart rate.
If the user heart rate exceeds the HRC target, the console will beep and
remind the user to reduce the amount of exercise.
HRC target calculation formula:
HP1: THR = )220 – AGE(*60%
HP2: THR = )220 – AGE(*75%
HP3: THR = )220 – AGE(*85%
USER PROGRAM MODE (P24-P27)
In standby, press (M) MODE to highlight P01, then press +/-
• to select
P24 – P27. Press (M) MODE to enter user-defined program
+/-
• Press to set TIME/DISTANCE/CALORIES/HEART RATE
+/-
• Press (M) MODE and to set the resistance value of each segment
of S01 – S20
• Press START/PAUSE to start training
HEART RATE RECOVERY (P28)
• In standby, press (M) MODE to highlight P01, then press +/- to select
P28. Press (M) MODE to enter HEART RATE RECOVERY program
• When running, press (M) MODE to directly access HEART RATE
RECOVERY
• Place both hands on the pulse sensors, the console will count down for
60 seconds and display the heart rate and the RECOVERY level F1-F6.
• Press RESET to exit
F-1 EXCELLENT F-4 FAIR
F-2 VERY GOOD F-5 BELOW AVERAGE
F-3 GOOD F-6 POOR
NOTE: Do not remove your hands from pulse sensors or the reading will not
be given during testing. The pulse monitor is a guide for reference only and
not for medical use or monitoring.
POWER SAVE FUNCTION
This product is fitted with a power saving mode which will activate if the
machine is inactive for a period of 4 minutes. To restart the machine, simply
press any key or pedal.
MPH TO KPH CONVERSION
In standby, press and hold the +,- keys for 3 seconds to enter the
conversion mode. Then press the +,- keys to select between 1-KPH
or 0-MPH. Press RESET to quit.
Note:
1. Keep the console far away from humid and corrosive environment.
2. Non-professional personnel do not disassemble and change.
WWW.REEBOKFITNESS.COM 25
24/04/2023 15:42 24/04/2023 15:42