Ricoh Aficio 3260c Operating Instructions Manual page 37

L L L L
In the [Printer URL] box, enter "http://printer's address/printer" as the print-
er's address.
If the server authentification is issued, to enable SSL (a protocol for encrypted
communication), enter "https://printer's address/printer" (Internet Explor-
er 5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://printer's address/ipp" as the printer's address.
M M M M
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.
N N N N
Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
O O O O
Check that the port of the selected printer is displayed in [Port:].
P P P P
Set a user code, if necessary.
This allows a SmartDeviceMonitor for Admin user to display and check the
number of sheets each user prints. For details, see SmartDeviceMonitor for
Admin Help.
Up to 8 numeric characters can be entered. No alphabetic characters or sym-
bols can be entered.
Q Q Q Q
Select the [Default Printer] check box to configure the printer as default.
R R R R
Click [Finish].
Installation starts.
S S S S
Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation
Note
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use[Add Printer]. See p.57 "If a
Message Appears during Installation".
Using the SmartDeviceMonitor for Client Port
2
31