Error Messages And Their Meanings - Ricoh Aficio 1515 Facsimile Reference Manual

Error Messages and Their Meanings

If there is an error, one of the following messages may appear on the display. If
other message appears, follow the message.
Message
Put original back, check it and
press Start key.
Error occurred, and trans. was
cancelled.
Memory is full. Scanning will
be stopped and only scanned
page(s) will be stored.
Cannot send fax as scanner is in
use by another function.
Updating the settings. Re-se-
lect dest./functions after up-
date finishes.
Check whether there are any
network problems.
[14-01]
Error Messages and Their Meanings
Causes and solutions
Original jammed during Memory Transmis-
sion. Place originals that have not been scanned
again.
A document jam occurred during Immediate
Transmission. Press the {OK} key, and then re-
send the pages that have not been sent.
An error occurred during Immediate Trans-
mission. Press the {OK} key, and then resend
the original.
Note
There may be a problem with the machine
or the telephone line (for example noise or
cross talk). If the error reoccurs frequently,
contact your service representative.
If you press [Exit], the machine returns to stand-
by mode and starts transmitting the pages that
have been stored.
The Copy function is in use. To cancel the job
in process, do the following, and then try fax-
ing again.
Press [Exit], and then press the {Copy} key.
Next press the {Clear/Stop} key. When the mes-
sage "
[Stop] key was pressed.
" appears, press [Stop].
Stop copying?
Wait with the main power switch on. The ma-
chine will enter standby mode after it exits
from RDS mode.
Cannot find the DNS server or SMTP server.
• Check the DNS server is correctly pro-
grammed using the Web browser. See the
Web browser's Help.
• Check the SMTP server is correctly pro-
grammed using the Web browser. See the
Web browser's Help.
• Check the LAN cable is correctly connected
to the machine. See "Connecting the Net-
work Cable to the Network", Network Guide.
• Check the network connection and radio
wave status.
• Consult your network administrator.
5
67