Optional Smartlinx Module - Siemens airanger DPL PLUS Instruction Manual

Optional SmartLinx Module

The standard AiRanger DPL Plus unit may also be enhanced with Siemens Milltronics
SmartLinx communication modules that provide an interface to popular industrial
communication systems.
To change or install SmartLinx module:
With power off and AiRanger DPL Plus lid opened:
1. Remove the 4 LCD card screws and the card itself.
2. Remove the one dummy card screw and the card itself.
3. Mount the card by mating the connectors and secure the card in place using the two
screws provided.
Note:
Refer to the SmartLinx module documentation for any required hardware
settings prior to replacing the LCD card or closing the AiRanger DPL Plus lid.
4. Wire in the SmartLinx card according to SmartLinx Manual.
5. Replace the LCD card and secure in place using the screws removed in Step 1.
7ML19981BD02 AiRanger DPL Plus – INSTRUCTION MANUAL
LCD Card
SmartLinx module
dummy card
board A
Page 13