Ariens Edge 52 Operator's Manual page 10

Mow up and down slopes, NEVER across.
Exercise caution when changing direction
on slopes. Use caution while operating near
dropoffs.
Avoid mowing wet grass. Wet surfaces can
cause a loss of traction and control.
DO NOT operate machine under any
condition where traction, steering, or stability
is in question. Tires could slide even if the
wheels are stopped.
Always keep the machine in gear when
going down slopes. Do not coast downhill.
Avoid starting and stopping on slopes. Avoid
making sudden changes in speed or
direction. Make turns slowly and gradually.
Use extra care while operating machine with
a grass catcher or other attachment(s). They
can affect the stability of the machine.
Fire and Fuel Specific
Extinguish all cigarettes, cigars, pipes and
other sources of ignition.
Use only an approved fuel container.
DO NOT remove fuel cap or add fuel with
the engine running or while hot.
DO NOT refuel indoors or in enclosed
spaces.
DO NOT store the machine or fuel container,
or refuel, where there is an open flame,
spark, or pilot light such as on a water
heater or other appliance.
If fuel is spilled, DO NOT attempt to start the
engine and avoid creating any source of
ignition until fuel vapors have dissipated.
To help prevent fires: keep machine free of
grass, leaves, or other debris build up; clean
up oil or fuel spillage and remove any fuel
soaked debris; allow engine to cool before
storing.
Use extra care in handling gasoline and
other fuels. They are flammable and vapors
are explosive.
Hauling
Use a single full-width ramp for loading and
unloading a machine for transport. Secure
with appropriate straps.
Towing
Follow the manufacturer's recommendation
for weight limits for towed equipment and
towing on slopes.
Service
Keep machine in good working order.
Replace worn or damaged parts.
Use caution when servicing blades. Wrap
the blade(s) or wear gloves. Replace
damaged blades. DO NOT repair or alter
blade(s).
Disconnect spark plug wire(s) and the
negative battery cable before making any
repairs.
Use only attachments recommended by
AriensCo that are appropriate to your use
and can be used safely in your application.
The use of non-genuine replacement parts
or accessories could adversely affect
machine operation and safety.
DO NOT change engine governor setting or
overspeed the engine.
EN - 8