Olivetti d-Copia 4200MF Manual page 34

FAX Operation (Basic)
Placing Originals
Dial the Receiving System
Ready to send.
Place original.
Destination
A OFFICE 1234567890
B OFFICE 1234568907
C OFFICE 1234569078
On Hook Direct Chain Detail/Edit
0001 0002 0003
AAA BBB CCC DDD
0006 0007 0008
FFF GGG HHH III
Destination Quick Setup Original/Sending
Data Format
Status
3-6
Destination
Detail
Address
Book
E-mail
1/1
Addr Entry
Folder Path
Entry
Delete Recall
FAX No.
Entry
0004 0005 No.
EEE i-FAX
Addr Entry
0009 0010 1/100
WSD Scan
JJJ
Image Quality Advanced
Setup
08/08/2009 10:10
Direct Transmission (When originals are placed in
the document processor)
After the telephone line has connected with the
receiving system, scanning of the originals placed in the
document processor starts. When multiple-page
originals are placed, each page is scanned after the
previous one is sent.
Direct Transmission (When originals are placed on
the glass surface)
This method is suitable for sending book originals that
cannot be placed in the document processor. After the
telephone line has connected with the receiving system, the
originals placed on the glass surface are scanned and sent.
NOTE:
When continuous scan is set, you can
continue with scanning of a next original after an
original on the glass surface has been sent. Every time
one page is scanned, you perform an operation to
allow continued scanning.
3
Place the originals on the glass surface or in the
optional document processor. Refer to the
machine's Operation Guide for placing originals.
4
1 Press [FAX No. Entry].
NOTE:
When you press the numeric keys to enter
numbers, the screen changes to the entry screen
for the fax number (the screen shown in the next
step).
OPERATION GUIDE