Going To An Individual Target; Go To A Waypoint - Raymarine RC400 Owner's Handbook Manual

Chapter 5: Operation
2. Select RESTART XTE. The dotted line between the original origin and

Going to an Individual Target

Rather than following a route, you can go directly to a selected target.
This can be an existing waypoint, a port or nearest facility or the current
cursor position.

Go to a Waypoint

To navigate directly to an existing waypoint:
1. From the normal chart display:
—or—
the target waypoint is redrawn from the vessel's current position to
the target waypoint and the XTE is reset to zero
i. Use the trackpad to position the cursor over the desired waypoint
until the waypoint options function is displayed:
...then press ENTER to display the waypoint functions:
ii. Press and release the GOTO/MOB key to display the waypoint
options and select GOTO WAYPOINT; the waypoint list appears. Use
the cursor to select the desired waypoint:
69
D4689_1
D4718-1
D4672-1