Important Information; Intended Use; Warranty; Technical Accuracy - Raymarine RC400 Owner's Handbook Manual

iv

Important Information

This handbook contains important information on the installation and
operation of your new equipment. In order to obtain the best results in
operation and performance, please read this handbook thoroughly.
Raymarine's Product Support representatives, or your authorized dealer,
are available to answer any questions you may have.

Intended Use

The Raymarine RC400 is a chartplotter display unit with a built-in GPS
receiver and internal GPS antenna. It is intended for marine navigation
purposes on recreational boats.

Warranty

To register your RC400 ownership, please take a few minutes to fill out
the Warranty registration card at the back of this handbook. It is very
important that you complete the owner information and return the card to
the factory in order to receive full warranty benefits.

Technical Accuracy

To the best of our knowledge, the information in this handbook was
correct as it went to press. However, our policy of continuous product
improvement and updating may change specifications without prior
notice. As a result, unavoidable differences between the product and
handbook may occur from time to time. Raymarine cannot accept
liability for any inaccuracies or omissions it may contain.
For the latest product information visit our website:

EMC Conformance

All Raymarine equipment and accessories are designed to the best
industry standards for use in the recreational marine environment.
The design and manufacture of Raymarine equipment and accessories
conform to the appropriate Electromagnetic Compatibility (EMC)
standards, but correct installation is required to ensure that performance
is not compromised.
www.raymarine.com
RC400 GPS Chartplotter