• If you experience a problem, or are missing a part, please visit us on-line at www.service.fisher-price.com. Or call, 1-800-432-5437 rather than return this product to the store. • Use only the basketballs supplied with this product. Do not use with regulation size...
PARTS PARTS Part not shown: Label Sheet Backboard Chute U Tube Door Clip 2 Pivot Tubes (Left and Right)
Page 5
2 Tubes (Left and Right) 2 Basketballs Handle 2 Hinge Tubes (Left and Right) Tip: All fasteners shown actual size. M5 x 23 mm Bolt – 8 M5 Lock Nut – 8 #8 x 1" Screw – 4 Note: Tighten and loosen all bolts and screws with a Phillips screwdriver.
BATTERY INSTALLATION BATTERY INSTALLATION Tip: We recommend the use of alkaline batteries for longer battery life! 1.5V x 4 "C" (LR14) Battery Compartment Door SHOWN ACTUAL SIZE • Loosen the screws in the battery compartment door on the back of the backboard. Remove the battery compartment door.
DECORATION DECORATION • Before applying the labels, wipe all surfaces with a clean, dry cloth to remove any dust or oils. ™ • Apply the labels as indicated in the illustrations. ™...
ASSEMBLY TIP ASSEMBLY TIP • When tightening bolts in tubes, you will need to press the lock nut into the opposite side of the tube (the hex hole). Place your thumb on the lock nut while tightening bolt with a Phillips screwdriver.
ASSEMBLY ASSEMBLY Backboard Grooves U Tube STEP 1 • Place the backboard face down on a flat surface. • Fit the ends of the U tube into the grooves in the bottom of the backboard.
Page 10
ASSEMBLY ASSEMBLY STEP 2 • Insert four #8 x 1" screws into the U tube and tighten.
Page 11
Door Clip Slot STEP 3 • Insert the door clip into the slot in the top of the backboard until it "snaps" into place.
Page 12
ASSEMBLY ASSEMBLY Pivot Tube Ball White Dot Ball Pivot Tube Loops Chute STEP 4 • Position the chute face down (loops are upright). • Position the pivot tubes so that the ball faces out and the pivot tube with the white dot is to the left. •...
Page 13
Hinge Tubes (Rounded Side Up) White Dot White Dot Loops STEP 5 • Next, position the hinge tubes so that the rounded side is up. • Match the hinge tube with the white dot to the pivot tube with the white dot. •...
Page 14
ASSEMBLY ASSEMBLY Pivot Tube White Dot Hinge Tube White Dot STEP 6 • Fit the end of each hinge tube into the end of each pivot tube. Hint: If the hinge tubes do not fit in the pivot tubes, reverse the hinge tubes.
Page 15
Pivot Tubes Rounded Side STEP 7 • Insert an M5 x 23 mm bolt through the outside of each pivot tube. • Fit an M5 lock nut, rounded side out, to the hex hole in the opposite side of each pivot tube.
Page 16
ASSEMBLY ASSEMBLY Hinge Tubes Loops White Dot Tubes White Dot STEP 8 • Now, match the tube with the white dot to the hinge tube with the white dot. • Slide the tubes through the next two loops, and onto the end of each hinge tube.
Page 17
Rounded Side STEP 9 • Insert an M5 x 23 mm bolt through the underside of each tube. • Fit an M5 lock nut, rounded side up, to the hex hole in the opposite side of each tube. • While holding the lock nut in place, tighten the bolt.
Page 18
ASSEMBLY ASSEMBLY White Dot Tubes White Dot Loops Handle STEP 10 • Position the handle so that it curves down. • Match the white dot on the handle with the white dot on the tube. • Fit the handle through the last two loops on the chute and onto the end of each tube.
Page 19
Rounded Side STEP 11 • Insert two M5 x 23 mm bolts through each end of the handle. • Fit two M5 lock nuts, rounded side up, to the hex openings in each end of the handle. • While holding the lock nuts in place, tighten the bolts.
Page 20
ASSEMBLY ASSEMBLY Straps STEP 12 • Wrap the straps on the chute around the handle and fasten.
Page 21
Sockets White Dot Pivot Pivot White Dot STEP 13 • Hang the backboard assembly on a door. • Turn the chute assembly upright. • Match the white dot on the underside of the pivot tube to the white dot on one of the sockets.
Page 22
ASSEMBLY ASSEMBLY Strap Strap STEP 14 • Wrap the straps on the top of the chute around the bar on the backboard assembly and fasten.
Page 23
Backboard Net Bracket Bracket STEP 15 Upper Peg Upper • At an angle, fit the upper peg on the Hole net bracket into the upper hole in the backboard. • Now, push to fit the lower peg on Lower the net bracket into the lower hole Hole in the backboard.
Page 24
ASSEMBLY ASSEMBLY Chute Clips Handle STEP 16 • "Snap" the chute clips to the handle. • Lower the net. Assembly is now complete.
GAME PLAY GAME PLAY • There are eight fun ways to play - four games, each with two levels of play (beginner and advanced). See pages 26 - 27 for game play instructions. Hint: Play with the chute down or folded up! For instructions on how to fold the chute, see pages 28 - 29.
FREEPLAY FREEPLAY See how many baskets you can make! BEGINNER ADVANCED • First, slide the power switch to ON. • First, slide the power switch to ON. • Next, slide the level switch to Beginner. • Next, slide the level switch to Advanced. •...
™ ™ SIZZLING SHOT CLOCK SIZZLING SHOT CLOC K Can you make 4 baskets before the time runs out? BEGINNER ADVANCED • First, slide the power switch to ON. • First, slide the power switch to ON. • Next, slide the level switch to Beginner. •...
FOLDING THE CHUTE FOLDING THE CHUTE Joint Joint STEP 1 • Grasp the joints on the chute and lift.
Page 29
Retainer Joint STEP 2 • Fit the joints into Retainer the retainers on the backboard. Retainer • Push the net brackets out, against the door. Joint • Tuck the chute inward. Joint...
TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE SYMPTOM SOLUTION The sound quality is faint • Battery power is weak or batteries are dead. Replace all four or there is no sound at all. batteries with fresh, "C" alkaline batteries. • You will need to reset the electronics. Locate the ON/OFF switch on the front of the game selector.
Consumer Relations at the address indicated above and for all associated freight and insurance cost. Fisher-Price, Inc. will bear the cost of shipping the repaired or replaced item to you. This warranty is void if the owner repairs or modifies the product. This warranty excludes any liability other than that expressly stated above including but not limited to any incidental or consequential damages.